Powerful universal motor with 1050 watts - extremely robust and optimized for milling work of any kind - especially suitable for use on portal milling machines or CNC routers. DI stands for direct control option via the controller. There, the speed required for the application can be selected or programmed directly. This reduces noise; the duty cycle can be increased; wear is reduced. Stainless steel motor flange with double bearings for higher milling forces - mounting Ø 43 mm, so-called "Eurobund". In addition, the bearings are provided with high-quality seals for perfect protection against dust ingress. Motor, bearings, seals are designed for use at longer duty cycles. Trouble-free cutter change - quick and easy thanks to spindle lock Full-shaft control electronics ensure the same speed even during hard milling work. Speed preselection and soft start are a matter of course with AMB. Motor is insulated for maximum safety against external influences. Electronics are perfectly protected against dust and external influences by complete potting - in comparison, other suppliers often work with unprotected electronics with a shorter service life. Electronic thermal overload protection protects against overheating. Original carbon brushes Made in Germany - with integrated cut-off. This prevents the collector from being damaged when the carbon is worn out. Additional silicone cushions between carbon and contact spring ensure long service life due to vibration damping. Versatile application possibilities - for mounting in e.g.: CNC gantries (routers), routers, milling devices, drill stands,... The collet holder corresponds to the original holder from eh. Kress for standard collets - compatible with almost all suppliers. Unmatched light weight at only 1.7 kg. Exceptionally slim design for the smallest possible space requirement during installation and ergonomically pleasant handling during free use, e.g. as a straight grinder or similar. Quick-change power cord can be changed directly on the unit and is available in lengths of up to 7.5 meters. The original Kress power cord module is technically unrivaled and makes it possible to change the power supply directly at the machine. The power supply does not have to be changed at the source (socket). It couldn't be simpler. This also allows several devices to be supplied with only "one" cable in alternating use.
|Attachment to the portal:||Spannhals 43||mm|
|Power Supply :||Netzkabelmodul 4||m|
F: With which signal is the speed adjusted? A: with a 0-10V DC signal.
F: How does the spindle behave at 0V control voltage? A: At 0V the spindle stands still, from about 1-9V the speed runs from minimum to maximum value, from 9-10V the spindle runs at maximum speed.
F: At 0V the spindle stands still, from about 1-9V the speed runs from minimum to maximum value, from 9-10V the spindle runs at maximum speed.
F: Why is an additional power supply needed for the speed adjustment? A: In contrast to many tinkering solutions for speed adjustment which one finds in the net, we work with a galvanically separated optocoupler with the signal exchange. In the event of damage to the portal control or the speed electronics of the milling motor, this ensures that mains voltage is applied via the signal line. The signal side is therefore completely separated from the power electronics. Therefore, this must be supplied separately with voltage.
F: What is the current consumption at the supply voltage 10...29V DC? A: The power supply unit for the power supply must be able to supply at least 40 mA DC.
F: What is the input resistance of the control input 0-10V? A: This is about 36 kOhm.
Milling motor, standard collet, union nut, operating instructions, power cable module 4m, concentricity test certificate.