Free of shipping costs!
Available as instant download
- Order number: 99999002
- EAN-Nr.: -
This package was created especially for the commercial end user. It includes, in addition to disassembly, inspection, cleaning, carbon replacement, replacement of the two main bearings, the statutory annual DGUV 3 test* for location-independent single-phase devices. If additional spare parts are required, we will contact you. * Repeat inspections according to DGUV regulation 3 According to accident prevention regulations, the proper condition of all machines and devices in operation must be ensured. For this purpose, individual inspection intervals are determined by the safety officer, depending on the area and frequency of use of the equipment. Should we determine that additional repairs are necessary, we will clarify the costs incurred with you and then carry out the professional repair immediately. Exemption from DGUV V3 testing for new machines The electrical machines we place on the market comply with the relevant EU directives and applicable EN standards. The conformity can be seen on each device via the CE marking and confirmed via the declaration of conformity in the operating instructions. Since the EC directives have been transposed into national law in the EU member states and the relevant standards are thus included, the devices also comply with the German Ordinance on Equipment and Product Safety Act. DGUV V3 regulates the repeat tests that are used to ensure that the safety-related delivery quality is still met after a certain period of use.
This confirmation in connection with the aforementioned points releases the operator from having to test or have tested a device that has been received undamaged in accordance with DGUV V3 before it is put into operation for the first time. The operator only has to record the first commissioning, and then carry out or have carried out a DGUV V3 inspection according to the inspection frequency specified by him.
Inspection, cleaning, carbon replacement, replacement of the two main bearings, DGUV 3 inspection, return shipment.
Durchsicht, Reinigung, Kohlentausch, Wechsel der beiden Hauptlager, DGUV-3 Prüfung, Rückversand.